Order 24/7

978-486-3116   Mon-Fri 8:30 - 4:30 EST

Free Quote: Email | 978-486-3116 (M-F 8:30-4:30 EST)

Call our team at Louis Page: 978-486-3116 | Free Quote

The Fence Post

How to Repair Your Broken Fence

April 13, 2016 | by Debbie Page

old weathered fence in paddock

Do You Have a fence that's begging for attention?

Spring is a great time to prepare your fence for the warmer months. Winter can be tough on fences. Trees fall down. Branches take out fence sections. The land freezes and defrosts, making your fence unstable. By the time spring rolls around, your fence can end up rusty, misshapen or even on the ground. In fact, spring, summer, and fall are all good times to work on a fence.

Things to Watch Out For

Now is the time to inspect your fence. To begin an inspection, walk the perimeter of the fence and inspect it from bottom to top. You will want to pay special attention to where the fence meets the ground. Have any animals burrowed underneath your fence?

Plus you will want to make sure there is no rust. Fences that are constantly touching the ground tend to rust at a higher rate. Over time, you may notice that an entire section has rusted away at ground level.

An inspection should also involve shaking the fence. Is it securely in the ground? Have any of the fence posts become damaged or loose in the ground. If your fence is coated in vinyl, check to see if the vinyl is peeling.

In addition to making any notes for yourself about damage, rust or peeling, you will want to pull off any vegetation that may have grown on your fence. Although some people find ivy and other plants appealing when it is growing on fences, vegetation speeds up the decay of your fence.

Signs of damage, and some fixes--

Rust

broken-fence.png

Rust is the number one enemy of metal fences. Once rust sets in, you can never restore your fence 100% but you can maintain it for a long life. To repair your fence from rusting:

  1. Brush off rust with a steel brush
  2. Spray area with your favorite metal protective spray paint/coating
  3. Monitor fence area for any additional rust

Peeling Vinyl Coated Mesh

tiger behind peeling green vinyl coated fence

Vinyl coating helps to prolong the life of your fence but over time the vinyl starts to peel. To maintain a vinyl coated fence:

  1. Trim away excessive peeling vinyl
  2. Use 60 grit sandpaper to sand away the small piece and create a smooth finish
  3. Spray area with your favorite metal protective spray paint/coating
  4. Monitor fence area for any additional peeling and rust

Fence Section Smashed by a Fallen Tree or Tree Branch

Fence crushed by hurricane Sandy

Winter can be tough on trees and anything around your fence that can fall on it and damage the fence. To address a section of fence that has been destroyed we recommend:

  1. Replacing the section with a panel of the same or a similar type of fencing
  2. Using strand wire to thread together the broken sections
  3. Replacing or upgrading the fence

A Maintenance Supply List 

 

Open notebook and pen

We also recommend creating a fence maintenance supply list when you are first building a fence and annually give your fence a check-up. For the supply list, we recommend:

  1. Strand wire, fence staples, and hog rings
  2. Purchasing an extra 20% of fence so you can some on hand for repairs
  3. Reviewing warranties
  4. Including all your fencing needs in one order

To quickly summarize, check your fence for:

  • Lack of sturdiness
  • Fence post stability
  • Weld strength
  • Rust
  • Vinyl peeling
  • Vegetation
  • Holes under the fence

You will want to fix or address any and all of the items on this list in preparation for warmer months ahead.

Louis E. Page is your single source for all your wire mesh requirements. We have strand wire, fence staples, hog rings and more in our catalog. It is up to you as to how many supplies you want to keep on hand to maintain a strong, sturdy fence. Some of our suppliers offer warranties, for example, Cavatorta, has an excellent product warranty.

At Louis E. Page, we pride ourselves on our customer service and being able to meet your needs. Including all your fencing needs in one order can save you time and ensure you have everything you need when you need it. For example, you might already know that you need welded wire mesh for your animals but what about the crops you plan on planting?

Your plants need support and we have Hortonova - Crop Support Netting. This netting is rot and rust proof, resistant to UV rays and chemical agents. It is ideal for vertical and horizontal growing techniques. You can keep your animals where you want them, plus easily cultivate plants when you combine your ordering needs.

Place an order today by calling 1-800-225-0508 or emailing sales@louispage.com.

Download our Catalog >

Read More

Topics: fence, hog rings, repair, Fencing Tips

Hog Rings & Pliers For Fastening Fence & Mesh

June 23, 2009 | by Duncan Page

Automatic or Manual Feed

Hog rings are a quick and easy way to attach two pieces of mesh or fence together. Hog ring pliers close the rings around the strands, securely fastening them together. Hand operated pliers are available in both automatic feed and manual feed styles.

Automatic Feed Hog Rings & Pliers--a free hand

These are essential tools for quick work. Rings automatically feed into the jaws of the pliers, giving you speedy one-hand operation. Your other hand is free to control the two pieces of mesh while you work the pliers. Strips of 50 hog rings load quickly and easily. The jaws of the pliers firmly close the rings. Auto-feed hog rings and hog ring pliers greatly reduce both the time and effort you spend on your project. Rings are packed in cartons of 2,500. Available in three different styles:

P-7 pliers & SR-8 rings

  • The smallest and lightest gauge rings
  • Rings close to a circle with a diameter of 1/4"
  • Available in galvanized and stainless steel for extra long life
  • 50 rings per strip
P-7 plier & SR-8 rings 
 
Ringer - 9/16 pliers & 1550 rings
  • 15 gauge hog ringshog rings - 1550
  • Rings close to 3/16" triangular shape
  • Available in galvanized and stainless steel for extra long life
  • Jaws extend beyond pliers for better reach
  • 50 rings per strip
 
Hog ring plier Ringer-9/16
 
HFP9 pliers & 9AL25 rings
  • Heavy duty pliers for use with heavy gauge mesh such as chain link
  • Extra strong holding power9AL25 9 gauge aluminum hog rings
  • 9 gauge aluminum rust-proof hog rings
  • Blunt nose rings with an opening of 1-3/16" close to 7/16" triangular shape
  • Magazine pivots to allow tool to reach into tight spaces
  • Pliers have comfortable padded grips
  • 25 rings per strip
 
HFP9 auto feed hog ring pliers
 
Manual Feed Hog Rings & Pliers--very tough
 
Use these handy and rugged hog ring pliers for fastening mesh and making repairs. Pliers have comfortable vinyl coated grips. A spring keeps the jaws open, making it easier to fit the rings to the pliers. Jaws close the rings securely around your work.
Pliers & Rings
  • Single feed pliers feature vinyl coated grips
  • 14 gauge blunt nose hog rings
  • Stainless steel rings are also available
  • Three sizes of rings: 3/8", 1/2" and 3/4"
  • Rings close to triangular shape
 
manual feed hog ring pliers
 
 
Read More

Topics: hog rings, hog ring pliers

Request Your Quote Now. Get Fast Quotes.
Click here to shop our online store

Recent Posts

Subscribe to Email Updates