Order 24/7

800-225-0508   Mon-Fri 8:30 - 4:30 EST

Free Quote: Email | 866-328-5018 (M-F 8:30-4:30 EST)

Call: 800-225-0508 | Free Quote

The Fence Post

Handy Tips For Installing Welded & Woven Wire Mesh & Fences

April 7, 2009 | by Frank Langone

Fence along leafy hiking trail

A Few Guidelines for Installing your Wire Fence

First: Decisionsacreage chart

  1. Determine the kind of fence you will need, based on the requirements of the application - the purposes and needs of your particular situation.
    • You can choose from a wide variety of fences and meshes.
    • Different heights, size, and spacing of mesh openings, finishes, and gauges of wire fence are available to fit every use.                                                                                                                                                
  2. Establish where the corners and ends of the fence are to be located.                                                                     
  3. Calculate the amount of fence and posts (end, corner and line posts) needed for the job. Don't forget to add any gates that are required to complete the project.
    • Wood or studded T posts can be used to hang the fence.
    • Figure line post spacing at 8 to 10 feet apart.

Next: Installation

  1. Fence posts
    • Make sure end, corner and gate posts are placed deeper in the ground than line posts for more holding power. Corners and ends may need bracing, depending on the type of fence used.
    • Be sure to tamp and level wood posts before moving on to the next step.
    • T posts can be driven into the ground using a manual post driver with handles. The driver eliminates the potentially dangerous use of an unwieldy sledgehammer.                                                                               
  2. Attaching fence to posts                                                                                                                                   
    •  Wood posts - galvanized slice-cut staples can be used. studded T post & clipThese are available in 3/4", 1", 1-1/4", 1-1/2", 1-3/4" and 2" sizes.
    • Studded T posts - metal clips are provided with each post to securely hold the fence.                                       
  3. Stretching the fence - the appropriate amount of tension depends on which mesh is used. Woven wire fencing, especially high-tension field and deer fences, requires a lot more tension than welded wire fences.
 
 
Shop Online at https://shop.louispage.com/
Read More

Topics: wire mesh, fence staples, galvanized, acreage guide, posts

How To Install Wood Fence Posts For Woven Wire Fence - Video

February 25, 2009 | by Frank Langone

Posts, Braces, and Tensioning

These videos show you how you can install a woven wire farm fence with wood fence posts using a hydraulic post driver. Typical applications are horse fence, field fence, garden fence, sheep and goat fence, deer fence - any fencing that needs strong wood posts. 


Woven Wire

Read More

Topics: woven wire, posts

A Strong H Brace for Your Woven Wire Fence - Video

February 25, 2009 | by Duncan Page

A Thorough and Trusty Guide

This video will show you how to build bracing strong enough to ensure that your fence will last a long time. Watch the clearly shown step-by-step procedures for building an "H" brace assembly.

 
You might also enjoy this "How To Install Field Fence" video. 
 
 
Shop online at https://shop.louispage.com/
Read More

Topics: woven wire, posts

Help is always available. Click for a free fence quote.
Click here to shop our online store

Recent Posts

Subscribe to Email Updates