Premium quality galvanized Apron Fence, manufactured by Keystone Steel and Wire in Peoria, IL, is the only 17 gauge, 1-1/2" heavy hexagonal netting made in the USA. The wire used is fully dimensional 17 gauge, on the high end of the acceptable tolerance limit.
The Apron
Keystone makes this roll as Galvanized Before Weld (GBW) material. They weave previously galvanized 17 gauge wire into the 1-1/2" hex netting. 17 gauge (.054") is much heavier than the standard 20 gauge (.0348") used in weaving standard chicken wire. Consequently, it is a much stronger product and will last a lot longer.
This Apron Fence is available in two roll sizes: 60" x 150' (48" high with a 12" apron) and 72" x 150' (60" high with a 12" apron). The roll is made with a single line wire running the length of the roll, 12" up from the bottom. This wire acts as a guideline when you are bending the 12" section out 90 degrees to form the apron.
Thick, Flexible, and Resists Peeling
Keystone does not have the ability to vinyl coat their Apron Fence. Its 60" rolls are sent to another quality US mill to be custom coated. This mill specializes in vinyl coating all types of wire mesh, including mesh used in building lobster traps. Here a high quality, thick and flexible coating of UV treated Black PVC is tightly bonded to the wire mesh. The coating is so tightly bonded that it resists scraping. It cannot be easily scraped off with a fingernail. And it will not peel off easily.
The finished product is first quality in every respect. Expected lifetime is hard to predict. Local environmental conditions in the air, soil, and rain have an impact on the length of time fencing material will last. These conditions vary enormously from one part of the country to another.
Enduring Quality
Knowing the material is produced by two of the leading mills in the United States can give you confidence that this product is the highest quality available. The extra handling and shipping involved in moving the material from one mill to the other do add to the cost. But the quality and endurance is there in every roll and speaks for itself.
Vinyl coated Apron Fence is very easy to use. The smooth finish makes it easy to handle and install. The unique 12" apron prevents animals from burrowing under the fence, keeping raccoons, foxes and other predators out of birds and pets in. The apron can be turned in either direction - to the outside to make a barrier or to the inside to make a pen.
Seamless Installation
Installation is easy since there is no need to dig a trench. Bend the mesh along the guideline. Just lay the apron on top of the ground so that vegetation grows up through it. This will securely anchor it in place. Digging animals will start at the fence itself, not realizing they have to start 12" away with their digging. This is a very effective barrier.
There are many uses for Apron Fence as a perimeter fence, such as:
If you are looking for a quality product that can provide an attractive, secure barrier on the ground surface as well as vertically, consider using vinyl coated Apron Fence.